Product Specification / Descript ion
Using the roller compactor, slab can be compacted to be compacted to a target density using load. To prepare wheel tracking specimen and to provide slave / to be cut for bending fatigue test. The units is pneumatically powered and is fully enclosed by a safety cut off switch for complete operator safety.
The apparatus comprises :-
*Steel
*PLC controller for compacting start, emergency stop, automatic selection and number of roller passes.
*Different level of vertical for can be selected up to approximately 12 kN.
Technical Specifications :
| Rolling Wheel Radius | 500 mm, Width 300 mm |
| Roller Car Moving Speed | 6 times / min (Forward & Reverse) |
| Roller Car Moving Distance | 300 mm |
| Roller Car Cycle Setting | 1 - 999 Cycle |
| Rolling Wheel Line Pressure | 9 kN |
| Rolling Wheel Temperature Range | RT - 200°C |
| Dimension | 1200 (L) x 600 (W) x 1790 (H) mm |
| Approx. Weight | 400 kg |
| Power | 415 V, 50 / 60 Hz, 3 ph, 3 KW |
Unit Consists Of :
| Model Number | Parts De | Qty |
| NL 2003 X / 002 – P 001 | 300 mm Sq. x 50 mm (H) Roller Compaction Mould | 1set |
| NL 2003 X / 002 – P 002 | Air Compression Set c/w Necessary Tubing & Connection | 1no. |
| NL 2003 X / 002 – P 003 | Heater Element with Thermostatic Temperature Controller (up to 200°C) | 1no. |
Optional Accessories :
| Model Number | Accessories De |
| NL 2003 X / 002 – A 001 | Safety Case |
| NL 2003 X / 002 – A 002 | 300 mm Sq. x 70 mm (H) Roller Compaction Mould |
| NL 2003 X / 002 – A 003 | 300 mm Sq. x 100 mm (H) Roller Compaction Mould |
